Skip to Content
Home
Shop
Installation guides
Contact us
Trimmed Design
0
0
Home
Shop
Installation guides
Contact us
Trimmed Design
0
0
Home
Shop
Installation guides
Contact us
Shop Suction cup mount for FiTech EFI 30001, 30002 handheld screen
Photoroom-20240709_161428.png Image 1 of 9
Photoroom-20240709_161428.png
Photoroom-20240709_161327.png Image 2 of 9
Photoroom-20240709_161327.png
Photoroom-20240709_161139.png Image 3 of 9
Photoroom-20240709_161139.png
Photoroom-20240709_161203.png Image 4 of 9
Photoroom-20240709_161203.png
20240709_155545.jpg Image 5 of 9
20240709_155545.jpg
Photoroom-20240709_161800.png Image 6 of 9
Photoroom-20240709_161800.png
Photoroom-20240709_161235.png Image 7 of 9
Photoroom-20240709_161235.png
20240709_155022.jpg Image 8 of 9
20240709_155022.jpg
20240709_155506.jpg Image 9 of 9
20240709_155506.jpg
Photoroom-20240709_161428.png
Photoroom-20240709_161327.png
Photoroom-20240709_161139.png
Photoroom-20240709_161203.png
20240709_155545.jpg
Photoroom-20240709_161800.png
Photoroom-20240709_161235.png
20240709_155022.jpg
20240709_155506.jpg

Suction cup mount for FiTech EFI 30001, 30002 handheld screen

$50.00

This mount for the FiTech EFI screens is designed to be mounted on the dash Or the windshield for a Non-intrusive install. It has an adjustable and extendable arm, making it very versatile. It will work with the 30001 and 30002 screens.

The screen fits snuggly in the holder so it will not rattle or fall out. It is made from durable ABS plastic so it will survive the heat and cold.

Strong suction cup: The 2.25" suction cup can be mounted to the dash or the windshield.

Extendable arm: The mounting Arm can be extended from 4 inch (101MM) up to 6 inches( 152MM). Allowing the screen to be placed in the most optimal position for your vehicle.

Wide adjustable angle: The Arm has a full 270 degree's of motion. Perfect for any angle windshield or dash.

Quantity:
Add To Cart

This mount for the FiTech EFI screens is designed to be mounted on the dash Or the windshield for a Non-intrusive install. It has an adjustable and extendable arm, making it very versatile. It will work with the 30001 and 30002 screens.

The screen fits snuggly in the holder so it will not rattle or fall out. It is made from durable ABS plastic so it will survive the heat and cold.

Strong suction cup: The 2.25" suction cup can be mounted to the dash or the windshield.

Extendable arm: The mounting Arm can be extended from 4 inch (101MM) up to 6 inches( 152MM). Allowing the screen to be placed in the most optimal position for your vehicle.

Wide adjustable angle: The Arm has a full 270 degree's of motion. Perfect for any angle windshield or dash.

This mount for the FiTech EFI screens is designed to be mounted on the dash Or the windshield for a Non-intrusive install. It has an adjustable and extendable arm, making it very versatile. It will work with the 30001 and 30002 screens.

The screen fits snuggly in the holder so it will not rattle or fall out. It is made from durable ABS plastic so it will survive the heat and cold.

Strong suction cup: The 2.25" suction cup can be mounted to the dash or the windshield.

Extendable arm: The mounting Arm can be extended from 4 inch (101MM) up to 6 inches( 152MM). Allowing the screen to be placed in the most optimal position for your vehicle.

Wide adjustable angle: The Arm has a full 270 degree's of motion. Perfect for any angle windshield or dash.

Trimmed Design

Made with Squarespace

Journal
Contact

Shop
Install guides