Photoroom-20241107_134705_2.jpg
Photoroom-20241107_134705_1.jpg
20260413_133417.jpg
Photoroom-20241107_134705_2.jpg
Photoroom-20241107_134705_1.jpg
20260413_133417.jpg

Intake Shield for 5.9L 12/24V Cummins Engines in 94-02 Ram 2500/3500 pickup

from $70.00

This Intake shield is designed to work with our Cummins 5.9 Cold air intakes. It helps block the hot air from the turbo and allows the stock air inlet to feed fresh cold air to the turbo.

The heat shield is formed and then fully tig welded for strength. Edge trim is also provided so the shield and intake will not rub and damage each other.

Powder coating is available apron request.

Color:

This Intake shield is designed to work with our Cummins 5.9 Cold air intakes. It helps block the hot air from the turbo and allows the stock air inlet to feed fresh cold air to the turbo.

The heat shield is formed and then fully tig welded for strength. Edge trim is also provided so the shield and intake will not rub and damage each other.

Powder coating is available apron request.

Related Products

Cold air intake for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 pickups Cold air intake for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 pickups Cold air intake for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 pickups Cold air intake for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 pickups Cold air intake for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 pickups
Cold air intake for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 pickups
from $300.00

This intake completely replaces the stock intake. Its large filter allows your 12/24 valve to breath much better and make far more power. Its made from4" diameter stainless steel and comes with all the clamps and coupler to install it.

4" stainless steel intake tube

4" straight coupler

(x3) 4" clamps

8.5x 12" air filter.

5 5 5 5 5
5" inch intake for 1994-2002 Cummins 12V-24V 5.9L
from $400.00

This is a 5” diameter intake for the 94-02 5.9L Cummins. It will fit your stock turbo or any bolt on aftermarket turbos. It is made from 304 stainless steel and is fully TIG welded. Unlike other intakes that use a large 45° coupler that can collapse under high boost. This intake only uses a small reducer coupler or a straight 5” coupler. It comes with everything needed to install it.

Not only will this intake look great it really makes the turbo sing. Add a heat shield to the kit for maximum HP gains.

Intake horn and piping kit for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 Intake horn and piping kit for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 Intake horn and piping kit for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 Intake horn and piping kit for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500 Intake horn and piping kit for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500
Intake horn and piping kit for 5.9L 12/24V Cummins Engines in 1994-2002 Ram 2500/3500
from $300.00

The cast intake horn on the Cummins is a known choke point. This intake horn is made from 3 inch stainless steel and helps smooth the air flow as it enters the intake manifold. Paired with the PQY intake heater block delete this kit removes all the restriction for the charge air. It not only makes performance gains but looks much better too.

Kit comes with everything you will need to install it.

  • 3 inch Stainless steel intake horn and cold side pipe

  • (4) M8×1.25×75 bolts

  • 3 inch silicone coupler

  • (2) 3 inch T-bolt clamps

  • Gaskets for intake plenum