Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8
Related Products
The cast intake horn on the Cummins is a known choke point. This pipping kit is made from 3 inch stainless steel and helps smooth the air flow as it enters the intake manifold. Paired with the PQY intake heater block delete this kit removes all the restriction for the charge air. It not only makes performance gains but looks much better too.
Kit comes with everything you will need to install it.
-3 inch Stainless steel intake horn, Cold side pipe and hot side pipe.
-(4) M8×1.25×75 bolts.
-New gasket for intake horn.
-straight 3 inch to 2.75 inch silicone coupler.
-straight 3 inch silicone coupler.
The cast intake horn on the Cummins is a known choke point. This intake horn is made from 3 inch stainless steel and helps smooth the air flow as it enters the intake manifold. Paired with the PQY intake heater block delete this kit removes all the restriction for the charge air. It not only makes performance gains but looks much better too.
Kit comes with everything you will need to install it.
-3 inch Stainless steel intake horn and cold side pipe
-(4) M8×1.25×75 bolts
-3 inch silicone coupler
-(2) 3 inch T-bolt clamps
This is the Hot side pipe form the turbo outlet to the intercooler. It is made from 304 stainless steel and fully TIG welded just like our other kits. It comes with a new 3”-2.75” coupler for the turbo outlet and clamps.
This is a direct replacement for the OEM hot side pipe on the 2003-2007 5.9 Cummins.
